41
Daily Repair and Maintenance
Tear out tape scker on the prinng plaorm from the boom of le side,
strip slowly, don't leave any residuals, and then paste the new sckers.
Note that it doesn't leave gap between the sckers.
7.1.3. Replacing Air Filtraon Core Components
The air filtraon core components are suggested to be replaced aer use 500
hours, otherwise it would lead to dust filtraon effect greatly reduced.
Maintenance Method:
Firstly, use strength to take out the fan cover board enrety at the right side
of printer, and then find out one filtraon core component cover board from
the list box in accompany with printer and install it directly.
To Next Page
Loading...
