WEG MVW3000 User Manual

7
DIAGNOSTICS AND TROUBLESHOOTING
Fault/alarm Reset Possible causes
A0366
Fault in the temperature sensor of
the thermal protection relay CH7
Power-on.
Manual (
O
/RESET key).
Auto-reset.
It resets automatically after the cause is
eliminated.
DIx.
Networks.
Temperature sensor broken wire.
PT100 accessory connectors disconnected.
Temperature channel active without a sensor
connected to the PT100 accessory.
A0367
Fault in the temperature sensor of
the thermal protection relay CH8
Power-on.
Manual (
O
/RESET key).
Auto-reset.
It resets automatically after the cause is
eliminated.
DIx.
Networks.
Temperature sensor broken wire.
PT100 accessory connectors disconnected.
Temperature channel active without a sensor
connected to the PT100 accessory.
F0368
Overtemperature detected by the
thermal protection relay CH1
Power-on.
Manual (
O
/RESET key).
Auto-reset.
DIx.
Networks.
Temperature above the fault level set on the ther-
mal protection relay and P0315 > 0.
F0369
Overtemperature detected by the
thermal protection relay CH2
Power-on.
Manual (
O
/RESET key).
Auto-reset.
DIx.
Networks.
Temperature above the fault level set on the ther-
mal protection relay and P0315 > 0.
F0370
Overtemperature detected by the
thermal protection relay CH3
Power-on.
Manual (
O
/RESET key).
Auto-reset.
DIx.
Networks.
Temperature above the fault level set on the ther-
mal protection relay and P0315 > 0.
F0371
Overtemperature detected by the
thermal protection relay CH4
Power-on.
Manual (
O
/RESET key).
Auto-reset.
DIx.
Networks.
Temperature above the fault level set on the ther-
mal protection relay and P0315 > 0.
F0372
Overtemperature detected by the
thermal protection relay CH5
Power-on.
Manual (
O
/RESET key).
Auto-reset.
DIx.
Networks.
Temperature above the fault level set on the ther-
mal protection relay and P0315 > 0.
F0373
Overtemperature detected by the
thermal protection relay CH6
Power-on.
Manual (
O
/RESET key).
Auto-reset.
DIx.
Networks.
Temperature above the fault level set on the ther-
mal protection relay and P0315 > 0.
F0374
Overtemperature detected by the
thermal protection relay CH7
Power-on.
Manual (
O
/RESET key).
Auto-reset.
DIx.
Networks.
Temperature above the fault level set on the ther-
mal protection relay and P0315 > 0.
F0375
Overtemperature detected by the
thermal protection relay CH8
Power-on.
Manual (
O
/RESET key).
Auto-reset.
DIx.
Networks.
Temperature above the fault level set on the ther-
mal protection relay and P0315 > 0.
MVW3000 | 7-10

WEG MVW3000 Specifications

General

Brand	WEG
Model	MVW3000
Category	DC Drives
Language	English