WEG MVW3000 User Manual

4
HMI OPERATION
Parameter menu.
Parameters.
Error log.
Parameter edition:
Numerical Parameters.
Alphanumerical Parameters.
Indication of occurred fault, alarm or notification.
Help function:
Parameters, alarms and faults.
Graphic Functions:
Graphic Function.
When the initialization is finished the display enters the parameter monitoring mode. The number of presented pa-
rameters can be programmed through the read-only and selection parameters (Menu →Configurations →HMI →Main
screen), and the font size varies according to the number of parameters programmed for monitoring, according to
Figure 4.4 on page 4-4 .
Trend 13:38 Menu
In Ref.
LOC
1800rpm
1800
rpm
Motor Speed
P0002:
Trend 13:38 Menu
In Ref.
LOC
1800rpm
P0005: 60.0 Hz
P0002:
P0003:
1800 rpm
200.0 A
Trend 13:38 Menu
In Ref.
LOC
1800rpm
Motor Speed: 1800 rpm
Speed Refer: 1800 rpm
Motor curre: 200.0 A
Inv. Status: In Ref.
Output Volt: 4160 V
Motor Frequ: 60.0 Hz
Figure 4.4: Parameter monitoring modes.
MVW3000 | 4-4

WEG MVW3000 Specifications

General

Brand	WEG
Model	MVW3000
Category	DC Drives
Language	English