WG20 Geared Motors | E-3
1. General
1.1. Safety and information markings
1.2. General information
1.3. Exclusion of liability
1.4. Indication of copyright and protective right
This Mounting Instruction (MI) is part of the gear unit as supplied and must be read carefully before working with the gear
unit. The instructions in the MI must be followed. Keep the MI close to the gear unit.
We assume no liability for damages or disruptions of operations resulting from the failure to observe this MI.
In order to develop the product further, the producer reserves the right to make modications to the individual components
or assemblies that are believed to be useful to improve the product, while maintaining its essential characteristics.
Protection class:
The gears are in accordance with Protection Class IP 65.
Motors are designed within Protection Class IP 55 at minimum (see nameplate).
Intended use:
The gears / geared motors are exclusively assigned for the generation of a dened rotary motion within machinery and
plants. The gears comply with the basic requirements of the machinery directive 2006/42/EC as far as possible.
Any other use or utilisation above this is deemed a not intended use. The user / operator of the machine / plant is solely
liable for damages resulting therefrom.
The details in this mounting instruction, on the nameplate as well as in other technical documentation, are to be considered
and observed.
Intended use for motors:
The motors comply with the basic requirements of the Low Voltage Directive 2014/35/EU. They are designed for power
operating as well as operating in combination with frequency inverters.
Standard motors are designed for use at:
■ Ambient temperatures of -20°C (-4°F) to +40°C (104°F)
■ Altitudes of ≤ 1,000 m above sea level
You must comply with the information contained in this MI to ensure safe operation of the gear unit, geared motor and to
achieve the specied product characteristics and performance requirements.
The producer assumes no liability for injury to people or damage to equipment or property resulting from non-observance
of this MI. In such cases, any liability for defects is excluded.
All technical documents are protected in the sense of the copyright law. The processing, reproduction and dissemination of
it, even in extracts, as well as other utilisation is not allowed, unless it has been expressly conceded in written form.
To Next Page
Loading...
