Product: Classification:
Helical geared motors WG20 C.
Parallel shaft geared motors WG20 F.
Helical bevel geared motors WG20 K.
Producer: WATT DRIVE Antriebstechnik GmbH
Wöllersdorfer Straße 68
2753 Markt Piesting - Austria
Authorized person for the compilation of the technical documents:
Norbert Reisner - Wöllersdorfer Straße 68 - 2753 Markt Piesting
The producer herewith declares referring to the above named incomplete machines that:
They meet the basic requirements of the Direction 2006/42/EC as far as possible.
The technical documents have been compiled according to Annex VII Chapter B.
The special technical documents for partly completed machinery have been created and can be made
available to the national authorities in response to a reasonable request.
Their commissioning is prohibited until they have been implemented according to the mounting
instruction and an EC Declaration of Conformity for the whole machine according to Direction
2006/42/EC is submitted.
Relevant applicable provisions:
EC Machinery Direction 2006/42/EC
Security for Machinery EN ISO 12100:2010
Electric Equipment EN 60204 -1:2006 + A1:2009 + AC:2010
Separating Safety Equipment EN ISO 14120:2015
Safety Distances EN ISO 13857:2008
Rotating Electrical Machines
EN 60034-1:2010 + AC:2010, EN 60034-2-1:2007, EN 60034-5:2001 + A1:2007,
EN 60034-6:1993, EN 60034-7:1993 + A1:2001, EN 60034-8:2007 + A1:2014,
EN 60034-9:2005 + A1:2007, EN 60034-11:2004, EN 60034-12:2002 + A1:2007,
EN 60034-14:2004 + A1:2007, EN 60034-30:2009
The original version of the mounting instruction belonging to the incomplete machine is in German.
.
Markt Piesting, 26.04.2017
Place and date of issue Klaus Sirrenberg - Managing Director
To Next Page
Loading...
