WEG WG20 - EU Declaration of Conformity ATEX 2014;34;EU

E-40 | WG20 Geared Motors
22. EU declaration of conformity ATEX 2014/34/EU
EU - Declaration of Conformity
in terms of the EU Directive on Explosion Protection 2014/34/EU

Watt Drive Antriebstechnik GmbH
Wöllersdorfer Str. 68 · A-2753 Markt Piesting · Phone: +43 (0) 2633 404-0 · Fax: +43 (0) 2633 404-220 · watt@wattdrive.com · www.wattdrive.com
Products of the geared motor series WG20/MAS: Classification:
 Helical geared motors C./H.
 Shaft mounted geared motors - /A.
 Parallel shaft geared motors F./F.
 Helical worm geared motors - /S.
 Helical bevel geared motors K./K.
 Angle parallel shaft geared motors - /C.
Producer: WATT DRIVE Antriebstechnik GmbH
Wöllersdorfer Straße 68
2753 Markt Piesting - Austria
The manufacturer declares the sole responsibility for the above-mentioned products for:
 Zone 2 and 22
 Device Group II
 Category 3G and 3D
Marking:
 II 3G Ex h IIC T4 Gc / II 3G Ex nA IIC T3 Gc
 II 3D Ex h IIIC 125°C Dc / II 3D Ex tc IIIC T125°C Dc
Applied harmonized standards:
 EN 80079-36:2016
 EN 80079-37:2016
 EN 60079-0:2012
 EN 60079-15:2010
 EN 60079-31:2014
Markt Piesting, 12.04.2018
Place and date of issue Klaus Sirrenberg - Managing Director