8. SERVING DELETION (STROKE COUNT)
The number of SERVINGS provided by each single key of each group of connected dosing can be
deleted in a single operation through the following procedure.
• Insert the activation key.
• Press the KMODE key twice, and the display will show the message “ErASE”:
• Then, within 30 seconds, press the KENTER key.
The display will show question marks to ask for confirmation of the action to be performed.
• To confirm data deletion, press KENTER again
The display will show:
• To terminate the deletion of counted servings phase (even if deletion has not
been performed) press the key KMODE.
The display will go back to showing
the message “
ErASE”:
• To go back to the normal indication, press KMODE.
If no key is pressed during deletion for 30 seconds, reading is aborted and the machine
reverts to the previous status.
To Next Page
Loading...
