Wega EVDS io - 2.6 Push-button Panel; Coffee Dispensing Button Layout; 2.7 Technical Data; Machine Specifications Overview

34
User manual
2.6 Push-button panel
2.7 Technical data
The machine’s technical data is shown in the follow-
ing table.
1GR
2GR
compatta
Power supply voltage ( V ) 120 / 220 - 240 220 - 240
Absorbed power ( W ) 1.300 / 2.350 2.500
Water tank capacity
(L / gal UK )
4 / 1.06
Safety valve calibration
(bar / psi)
1.9 / 27.6
Boiler operating pressure
(bar / psi)
0.8-1.4 / 11.6-20.3
Feedwater pressure.
(bar / psi)
1.5-6 (MAX) /
0,15 - 0,6 MPa MAX
Coee dispensing pressure
(bar / psi)
8-9 / 116-130.5
Width (cm / in) 39 / 15.35 56 / 22.05
Depth (cm / in) 52,5 / 20,67 52,5 / 20,67
Height (cm / in) 51,1 / 20,11 51,1 / 20,11
Operating conditions 5-35 °C /
95° U.R.MAX
According to Directive 2006/42/EC, the machine bears
a CE marking, meaning that the Manufacturer declares,
under his own responsibility, that the unit is safe for
people and property.
The CE nameplate which provides the identication
data is axed to the base of the frame, under the drain
tray. Below is an example of a nameplate:
Via C. Bardini
,
1 SUSEGANA
(
TV
)
- ITALY
Tel. +39.0438.1799700 Fax +39.0438.1884890
MADE IN ITALY
W
S/N:
Mod.
Hz
Y
V
WEGA MACCHINE PER CAFFÈ S.r.l.
MARCHIO COMMERCIALE
When contacting the Manufacturer, always provide
the following information:
• S/N - machine serial number;
• Mod. - machine model
• Y - year of manufacture;
The appliance data can also be found on the label
located on the machine’s packaging.
It is forbidden to remove or damage the nameplate. If this occurs,
replace it as a matter of urgency, dealing exclusively through the
Manufacturer.
Stop/
Programming
1 espresso
2 large
coees
2 espressos
1 large
coee
Coee push-button panel
STOP
PROG.
The CE label is axed
underneath the drain tray.