Wega EVDS io - 10 Spare Parts; Spare Parts Replacement Policy; 11 Decommissioning; Decommissioning Procedure

44
User manual
10 SPARE PARTS
Machine components and/or parts must only be
replaced by trained technicians.
Under no circumstances are Users authorised to replace machine
components and/or parts.
11 DECOMMISSIONING
The machine must be decommissioned by a Manufac-
turer Qualied Technician, because the equipment must
be disconnected from the electricity and water mains,
and all the internal circuits must be emptied of the water.
After being decommissioned, the machine can only
be recommissioned by a Manufacturer Qualied Techni-
cian.
Under no circumstances are Users authorised to decommission
and/or recommission the machine after long periods of inactivity.
12 DISASSEMBLY
We recommend that the machine is disassembled by
one of the Manufacturer’s Qualied Technicians.
13 DISPOSAL
13.1 Disposal information
For the European Union and the Euro-
pean Economic Area only.
This symbol indicates that the prod-
uct cannot be disposed of with house-
hold waste, pursuant to the WEEE Direc-
tive (2012/19/EC), the Battery Directive
(2006/66/EC) and/or the national laws implementing
those Directives.
The product should be handed over to a designated
collection point, for example the dealer when purchas-
ing a new product with similar features, or an authorised
collection site that recycles electrical and electronic
equipment waste (WEEE), as well as batteries and ac-
cumulators. Improper handling of this type of waste
can have negative consequences on the environment
and human health, due to the potentially hazardous
substances which are usually found in this kind of waste.
Your cooperation in correctly disposing of this
product will contribute to the eective use of natural
resources and you will avoid incurring nes provided by
law. For more information about recycling this product,
contact either your local authority, the entity responsible
for waste collection, an authorised dealer or your house-
hold waste disposal service.
To dispose of the machine, it is advisable to seek advice from one
of the Manufacturer’s Qualied Technicians.
13.2 Environmental information
The machine features an internal lithium button bat-
tery, which is located in the circuit board and ensures
data storage.
Dispose of the battery in accordance with current
national regulations.