Need help?Do you have a question about the WeighTech WT3000-P and is the answer not in the manual?
How to turn the indicator on and off using the power button.
Details on the customizable function key and its parameter settings.
How to switch between displaying gross and net weight readings.
Changing the indicator's mode between weight measurement and piece counting.
How to reset the indicator to zero, essential for accurate measurements.
How to subtract the weight of containers or packaging from the total weight.
Using the M+ key for accumulating weights and transmitting data.
Instructions for charging the internal battery of the weighing indicator.
Guidance on connecting and selecting the correct power supply voltage.
Explanation of the indicator's display elements and symbols.
Step-by-step guide to manually zeroing the scale.
Detailed instructions for using the tare function to exclude container weights.
How to set a predetermined tare value before weighing.
How to switch between gross and net weight displays.
Instructions for using the piece counting feature of the indicator.
Detailed parameters for user configuration, including backlight and auto-power off.
Configuration options for serial data transmission, including baud rate and parity.
List of serial commands for controlling and querying the weighing indicator.
Steps to access calibration settings by manipulating a jumper on the main board.
Navigation through calibration and setup menus, including capacity and calibration options.
Setting the weighing capacity and division (graduation) of the scale.
Procedures for performing zero and span calibration of the weighing indicator.
Configuring filters for stable readings and auto-zero functions.
Wiring diagrams for connecting 6-wire and 4-wire load cells.
How to connect the indicator's serial output to a PC via RS232.
Diagrams for connecting optional serial outputs for RS232 and RS485.
Instructions for connecting and configuring the Zebra TLP 2844 printer, including setup and print button use.
Information on connecting and using remote displays, including indicator settings and specific connection details.
How to set up and connect via the optional Bluetooth interface.
General| Brand | WeighTech |
|---|---|
| Model | WT3000-P |
| Category | Accessories |
| Language | English |
To Next Page
