WEIGHTECH USA Weighing indicator WT3000-IR ABS– Technical manual
Wt3000irabs v20151126
6
2 SAFETY REMINDER
• The indicator should not be directly exposed to intense sunlight.
• The indicator should be used in a flat and leveled surface.
• The AC power supply must be grounded.
• This equipment may not be used in hazardous areas.
• Do not use corrosive products to clean the indicator.
• Power off the indicator before connecting to any other devices, including the load cell.
• If the indicator will not be used for prolonged periods of time, is recommended that the
battery installed inside the equipment needs to be recharged every 3 months in order to
prevent damage.
3 EXTERNAL APPEARANCE