WeighTech WT3000-P - 6.7 Gross vs. Net Weight Display; 6.8 Piece Counting Mode

WEIGHTECH USA Weighing indicator WT3000-IR ABS– Technical manual
Wt3000irabs v20151126
12
6.7. GROSS AND NET WEIGHT INDICATION
To switch between gross weight and net weight indication, press the .
When the net weight is displayed, indicating the net weight will be displayed.
6.8. PIECE COUNTING
To activate the piece counting function or change the sample press .
Select the number of pieces in the pressing the , then apply the amount of selected pieces
on the platform and press the , the indicator will show the number of pieces on the platform,
to switch between piece counting and weighing press .
• Important: The caption shows that the applied weight is insufficient to piece counting
function, the average weight of each piece cannot be less than 0.2 d.