WeighTech WT3000-P - 7.1 User Configuration Settings

WEIGHTECH USA Weighing indicator WT3000-IR ABS– Technical manual
Wt3000irabs v20151126
14
7.1 USER CONFIGURATION
Once inside the 01 FnC menu press and select the parameters FnC-00 to FnC-13, press
to confirm. Perform the desired alteration and press to save and return to the
parameter selection menu.
Use the keys , , and to navigate through the menu screens.
Paramete
r
Function
Code
Description
Factory
default
FnC-00
Returns to
the previous
menu
FnC-00
Returns to the previous menu
---.---
FnC-01
Backlight
bL OFF
Backlight off
bL OFF
bL On
Backlight on
• If the “bl On” option is selected, the backlight will turn on automatically when the weight applied is greater
than 10d and will turn off automatically after 10 seconds without variation in the weight applied.
FnC-02
Auto power
off
A oFF 0
Disabled
A oFF 0
A oFF 1
Auto power off after 1 minute
A oFF 2
Auto power off after 2 minutes
A oFF 3
Auto power off after 3 minutes
A oFF 4
Auto power off after 4 minutes
A oFF 5
Auto power off after 5 minutes
A oFF 6
Auto power off after 6 minutes
A oFF 7
Auto power off after 7 minutes
A oFF 8
Auto power off after 8 minutes
A oFF 9
Auto power off after 9 minutes