上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
17 / 47
3.1.9. Set Absolute Function Window
In this window, you can set the machine origin, also known as datum:
This operation is required only commissioning for the machine tool is required.
To set datum, do one of the following:
• Click Set to set current coordinate as datum.
• If you have replaced the software, click Import Datum to import previously set
datum parameters.
After setting, click Export Datum to export the set datum for later use.
To Next Page
Loading...
