WEIHONG NCStudio V12 - Advanced Operations; Picture Display Modes

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
34 / 47
In general, the range of the parameter Score is [0.3, 0.7] and the range of the
parameter Level is [4, 6].
After it is done, click Detect to detect whether shooting is successful.
After the setting is completed, it is necessary to repeatedly observe in case of
mistakes.
4.4. Execute Other Operations
This section introduces the following auxiliary operations:
• Select image display mode
• Execute array machining
• Enable CCD
• Set the workpiece origin by CCD center
• Set safety offset
• Set workpiece offset compensation
• Set workpiece size compensation
• Set Z-axis depth compensation
• Execute simulation
• Set automatic layer compensation
4.4.1. Select Picture Display Mode
Currently, picture display mode includes the following:
• Display live pictures captured by the camera.
• Display the shooting pictures.
After matching, whether the matching is successful or not, the picture display area
in CCD Setting window displays the currently matched picture in real time.
To display live pictures captured by the camera, click the picture display area in CCD
Setting window.