上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
11 / 53
1.3.1 Layout
The front view of the operation panel is as follows:
1. Alpha-numeric keys
Used to input characters and numbers. Its use is generally the same with that of
the computer keyboard:
– Press an alphabet key to enter the alphabet on the right-lower part.
– Press Shift key and an alphabet key to enter the alphabet on the left-
upper right.
2. Keys for common operations
Used to enable frequently used operations, including ATC CW, ATC CCW, ATC
OUT, Unclamp, Reset, Simulate, Single Block and HW Guide keys.
3. Keys for common ports
Used to turn on / off frequently used ports, including Air, Light, Coolant, Oil
keys, and control rapid movement, including Rapid key.
To Next Page
Loading...
