18 Assembly
4.4 Inserting the disposable collection bag
1. Insert a new disposable collection bag.
2. Push a new aspiration tube onto the elbow
connector of the disposable collection bag.
3. Switch on the device.
4. Set the vacuum of -0.8 bar on the device and
connect the patient connection.
The device creates a vacuum in the collection canis-
ter and the disposable collection bag unfolds. As
soon as the disposable collection bag has completely
unfolded inside the collection canister, you can set
the desired vacuum and start aspirating (see “5.2 As-
piration” on page 22).
4.5 Fitting an accessory bag
If the accessory bag WM 10655 is not included in the
scope of supply of your appliance, you may order the
accessory bag as an accessory. It is used to hold as-
piration catheters and other small parts. The acces-
sory bag cannot be fitted at the same time as a
To Next Page
Loading...
