Hygienic preparation 31
6.1 Preparations
Re-usable collection canister
Important
When removing and emptying the re-usable collec-
tion canister, take care that the secretion cover does
not accidentally come off the collection canister and
allow the contents to spill over.
1. Unwind the aspiration tube from the tube holder
plate to make it easier to remove the canister
and to reduce the risk of the secretion cover
coming open by accident.
2. Remove the canister from the motor unit by
pulling out the locking tab and lifting the
canister out of its holder.
3. Remove the secretion cover.
4. Empty the collection canister.
Important Be sure to observe the relevant rules for disposal
(see “3. Safety instructions” on page 11).
5. Remove the ball from the overfill system. Pull the
tabs apart slightly to allow the ball to fall out.
To Next Page
Loading...
Need help?
General
