Hygienic preparation 35
6.3 Reassembling the disposable collection
canister
Re-usable collection canister
After cleaning, disinfection or sterilization, reassem-
ble the parts as follows:
1. Insert filter in filter cover. Make sure that the filter
is correctly seated in the groove in the filter cover.
2. Fully insert filter cover into secretion cover.
3. Press sealing ring into groove in secretion cover.
4. Press the ball of the overfill system fully into its
housing in the secretion cover.
5. Check the proper fit of bracing clip.
To Next Page
Loading...
