36 Hygienic preparation
6. Place the secretion cover on the collection
canister.
7. Fit the aspiration tube.
8. Attach collection canister to appliance case.
9. Refit the tube holder plate by sliding it to the
right.
Disposable collection canister
After cleaning, disinfection or sterilization,
reassemble the parts as follows:
1. Refit tube holder plate by sliding it to the right.
2. Put the disposable collection canister in the
holder.
3. Connect the collection canister to the intake
connector of the motor unit via the vacuum
tube.
4. Insert a new disposable collection bag (see “4.4
Inserting the disposable collection bag” on
page 18).
To Next Page
Loading...
