24 Using the Defibrillator Welch Allyn AED 10 Automatic External Defibrillator
Operating Procedures — Quick Reference
The following instructions provide an experienced operator with the main steps for using
the Welch Allyn AED 10. Detailed operating information and procedures are provided in
“Operating Procedures – Detailed Information” on page 25. Users should refer to the
Quick Reference Guide included with the Welch Allyn AED 10.
Assess the Patient
Verify that the patient is unconscious, is not breathing, and unresponsive (has no signs of
circulation). Even if the victim takes occasional gasps, rescuers should suspect that
cardiac arrest has occurred. Proceed with treatment.
Attach Electrodes
1. Apply pads to patient’s bare chest.
2. Connect the cable to the AED 10.
Start the Welch Allyn AED 10 and Deliver a Shock
1. Push the green ON/OFF button located at the upper right corner of the Welch Allyn
AED 10 next to the large number “1”.
2. Listen to voice prompts and read text instructions on the screen next to the large
number "2".
3. If prompted, press the red Shock button next to the large number "3".
Begin CPR – Start with Chest Compressions
To Next Page
Loading...