Parameter
Description
Enable Switches the OpenVPN client on or o
Index Freely selectable, for identification purposes only
OpenVPN Server The IP address or the FQDN of the OpenVPN server
Authentication Type Authentication method (recommended x509‑cert)
Username Username
Password Password
Description Brief description of the client
Show Advanced Options:
Parameter
Description
Source
Interface
The interface over which the OpenVPN tunnel is to be established
Interface
Type
tun or tap (recommended tun)
Cipher Encryption method
HMAC Signs all packets involved in the TLS handshake. Sha1 is default
Compres‑
sion LZO
Enable or disable compression of data
Redirect‑
Gateway
If redirect gateway is enabled, the traic is routed through the tunnel
Remote
Float
If Remote Float is enabled, the client will also accept packets that match the authentication but
do not originate from the server address. This option is useful if the server has a dynamic IP
address
Link De‑
tection
Interval
Interval at which the tunnel connection is checked
Link De‑
tection
Timeout
Timeout for a tunnel connection check packet
MTU Maximum packet size
TCPMSS Specifies the maximum size for TCP packets
Fragment Maximum packet size for UDP packets
Enable De‑
bug
Switches debug mode on or o
Expert Con‑
figuration
OpenVPN tunnel options that are not available via the web interface can be entered here directly
The client always needs the CA certificate of the server, otherwise it cannot be authenticated.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 116
To Next Page
Loading...
