3.12.2 3.11.2. New WAN
With the help of Wizards > New WAN a new WAN interface can be set up. We recommend that you also do this via
the wizard, since several parameters are set here.
Parame‑
ter
Description
Interface The new WAN interface
Type Static IP / DHCP or PPPoE, depending on the selection the parameters change
Primary IP The IP address of the interface
Netmask The subnet mask of the interface
Gateway The gateway of the router
Primary
DNS
The primary DNS server of the router
NAT Turns NAT on or o
Username If PPPoE is selected under Type: User name of the provider for ADSL access. Important: A DSL
modem is required for this.
Password If PPPoE is selected under Type: Password of the provider for ADSL access. Important: A DSL
modem is required for this.
3.12.3 3.11.3. New Cellular
Under Wizards > New Cellular you create a new cellular interface as WAN interface and can configure it.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 134