3.1.8.3. SnmpMibs
The SnmpMips for monitoring the router can be downloaded here and used for corresponding evaluations. Please
select the desired MIB file and then click the download button.
3.1.8.4. Read SNMP Mibs using SNMPWALK.
1) Configure SNMP, such as shown below:
Read out the data entered above via SMTPWALK on e.g. a LINUX computer:
snmpwalk ‑v3 ‑u WeloSNMPUser ‑l AuthPriv ‑a SHA ‑A 123456789 ‑x AES ‑X 123456789 10.255.229.10
snmpwalk ‑v3 ‑u WeloSNMPUser ‑l AuthPriv ‑a SHA ‑A 123456789 ‑x AES ‑X 123456789 udp6:[2a02:d20:8:c01::1]
2) Download MIBS from TK800
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 36
To Next Page
Loading...
