Welotec TK800 - Page 39

WELOTEC‑MIB::ihWan3g.1.2.3.6.0 = “”
WELOTEC‑MIB::ihWan3g.1.2.4.1.0 = INTEGER: 0
WELOTEC‑MIB::ihWan3g.1.2.4.2.0 = INTEGER: 0
WELOTEC‑MIB::ihWan3g.1.2.4.3.0 = Gauge32: 0
WELOTEC‑MIB::ihWan3g.1.3.1.1.0 = STRING: “262010052709611”
WELOTEC‑MIB::ihWan3g.1.3.1.2.0 = STRING: “860461024084629”
WELOTEC‑MIB::ihWan3g.1.3.2.1.0 = Gauge32: 0
WELOTEC‑MIB::ihWan3g.1.3.2.3.0 = INTEGER: 0
WELOTEC‑MIB::ihWan3g.1.3.2.4.0 = INTEGER: 0
WELOTEC‑MIB::ihWan3g.1.3.2.5.0 = Gauge32: 193
WELOTEC‑MIB::ihWan3g.1.3.2.6.0 = Gauge32: 0
WELOTEC‑MIB::ihWan3g.1.3.3.1.0 = “”
WELOTEC‑MIB::ihWan3g.1.3.3.2.0 = “”
WELOTEC‑MIB::ihWan3g.1.3.3.3.0 = INTEGER: 1
WELOTEC‑MIB::ihWan3g.1.3.3.4.0 = “”
WELOTEC‑MIB::ihWan3g.1.3.3.5.0 = “”
WELOTEC‑MIB::ihWan3g.1.3.3.6.0 = “”
WELOTEC‑MIB::ihWan3g.1.3.3.7.0 = INTEGER: 0
WELOTEC‑MIB::ihWan3g.1.3.3.8.0 = INTEGER: 0
WELOTEC‑MIB::ihWan3g.1.3.3.9.0 = “”
WELOTEC‑MIB::ihWan3g.1.3.4.1.0 = INTEGER: 0
WELOTEC‑MIB::ihWan3g.1.3.4.2.0 = INTEGER: 0
WELOTEC‑MIB::ihWan3g.1.3.4.3.0 = Gauge32: 0
3.1.10 3.1.9. Alarm
3.1.9.1. Status
The alarm status shows an overview of the triggered alarms.
In this example, INFO message ID 1 shows that Fastethernet port 0/1 has been connected. ID 2 shows a warning
message that the Fastethernet port 0/1 has been disconnected (Fig.1).
On the right side of the web interface you can see the alarm messages permanently regardless of which menu you
are in (Fig. 2).
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 38