3.4.4 3.4.4. Interface Backup
Here you can create a backup of the interfaces of your router. If one interface fails, the other interface takes over
the functions. To be accessed under Link Backup > Interface Backup.
3.4.4.1. Interface Backup Configuration
Under Link Backup > Interface Backup and Interface Backup you can define which interface should be the main
interface and which should be the backup interface.
Parameter
Description
Main Interface The main interface is defined here.
Backup Interface The backup interface is defined here.
Startup Delay Delay in seconds at system startup.
Up Delay Delay when switching from the backup interface to the main interface.
Down Delay Delay when switching from the main interface to the backup interface.
Track ID The track index, from the previously created track entry.
3.4.4.2. Interface Backup Status
On the status page you can see which interfaces have been defined as main and backup. You can also see which
interface is currently active (Active Interface main).
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 85
To Next Page
Loading...
