Lit. No. 27366, Rev. 01 February 15, 2008
28
1. Turn the vehicle ignition switch to
the "ON" or "ACCESSORY"
position.
2. Press the ON/OFF button on the
control. The power indicator light
glows red, indicating the control
is ON. The indicator light glows
red whenever the control and the
vehicle ignition switch are both
ON and the electrical
connections to the snowplow are
completed.
The ON/OFF button operates as
an emergency stop if required.
Function Time-Outs
All control functions, except
LOWER/FLOAT, time out (stop)
automatically after a period of time.
This is to limit the amount of
electrical energy required from the
vehicle.
NOTE: If control function times out
before desired blade movement is
complete, release button and
press again.
Automatic Shutdown
The control will automatically turn
OFF after being idle for 20 minutes.
SYSTEM OVERVIEW – CONTROLS
MVP PLUS™ CabCommand HAND-HELD CONTROL
WARNING
To prevent accidental
movement of the blade, always
push button to switch the
control OFF whenever the
snowplow is not in use. The
control indicator light will turn
off.
Smooth Stop
The control automatically allows the
blade to coast to a stop when the
button is released. This results in
smoother operation, reduces the
shock to the hydraulic system and
increases hose and valve life.
RAISE
LOWER
R
L
ON/OFF
FLOAT
SCOOP
WING
VEE
WING
Power Indicator
Light (red)
ON/OFF
Button
(Emergency
Stop)
Float Light
(green)
Excerpts taken from UltraMount
®
Owner's Manual (Lit. No. 44230, Rev. 06).
To Next Page
Loading...
Need help?
General
