WHILL F - Page 53

52
WHILL Model F User Manual
3
8.
Install the controller to the arm rest on the opposite
side. Likewise, install the hand rest removed to the
arm rest on the opposite side.
For the installation procedure, refer to Steps 6 to 10 in
“3.2.4. Installing the arm rests” “■Installation pattern
2” (on page 32).
9.
Install each of the arm rests on the device.
For the installation procedure, refer to Steps 11 to 13 in
“3.2.4. Installing the arm rests” “■Installation pattern
2” (on page 32).
10.
Tighten the arm rest adjustment screw, and x the arm
rest in place.
11.
Connect the cable.
For details on how to connect the cable, refer to “3.2.6.
Connecting the cable” on page 44.
12.
Install the battery.
For the installation procedure, refer to “3.2.8. Installing
the battery” on page 46.
13.
Turn on the power and check that the device moves
forward, backward, left, and right without problems.
If an error appears on the display, check “10.
Troubleshooting” on page 108. If the issue persists,
contact your dealer or customer support.