en
46 WILO SE 2019-11
Action Setting in the menu Action
Underfloor heating
Dynamic Adapt plus
Table9: Example 1
Setting the control function “Differential pressure ∆p-v”
Action Setting in the menu Action
Pump setting
Settings assistant
Basic control modes
Differential pressure ∆p-v
Table10: Example 2
NOTICE
Follow the detailed instructions online for additional
settings.
➜See QR code or
www.wilo.com/stratos-maxo/om
7.3 Double pumps
For double pumps, the operating mode main operation and standby
operation with automatic fault-actuated switchover is preset at the
factory.
7.4 Faults, causes, remedies
The pump displays warnings and errors with plain text messages
and hints for troubleshooting.
NOTICE
Follow detailed instructions on the internet for
troubleshooting.
➜See QR code or
www.wilo.com/stratos-maxo/om
8 Spare parts
Obtain genuine spare parts only from a qualified specialist or cus-
tomer service.
9 Disposal
9.1 Information on the collection of used electrical and
electronic products
Proper disposal and appropriate recycling of this product prevents
damage to the environment and putting your personal health at
risk.