34
TROUBLESHOOTING
11.3 Other Problems
Filament stuck in nozzle when removing
Please visit https://cocoonproducts.com.au for a video on how to clear the nozzle with stuck
lament.
Where can I buy more lament?
If you require more lament, visit our online store, https:// cocoonproducts.com.au to purchase
various colours.
What brand of lament should I buy?
We recommend using only Cocoon Create branded lament. Lower quality generic laments
can damage your ModelMaker 3D Printer and potentially void your warranty.
11.4 Useful Terms
Brim/Raft
Types of printed foundations that help models adhere to the print bed
Display
Provides the main interface for operating the 3D Printer
Extruder Assembly
The section lament is pushed through encompassing the hot end and nozzle
Firmware
Software that is programmed into the electronic board
GCODE
Code that is produced using the slicing process. Describes the movements and temperature
settings of your 3D printer
Inll/Fill Density
Inll/ll density relates to how solid the print is. The greater the number, the denser the object
becomes and the more lament is required. Fill density of 100% = a completely solid object.
To Next Page
Loading...
Need help?
General