Winplus Cocoon Create Model Maker HE170703 User Manual

9
AFTER SALES SUPPORT
1300 663 907 CUSTOMERCARE@WINPLUS.COM.AU MODEL: HE170703
TECHNICAL SPECIFICATIONS
Printing
Print Technology: Fused Filament Fabrication (FFF)
Build Volume: 120 x 135 x 100mm (Width x Depth x Height)
Layer Resolution: 0.1 – 0.4mm
Positioning Accuracy: X 0.012mm
Y 0.012mm
Z 0.004mm
Extruder Quantity: Single Extruder
Extruder Diameter: 0.4mm
Print Speed: 10mm/s - 70mm/s
Travel Speed: 10mm/s - 70mm/s
Supported Print Materials: Cocoon Create Branded PLA, PLA Wood
Temperature
Ambient Operating Temperature: 15°C – 30°C
Operational Extruder Temperature: 170°C - 250°C
Software
Slicer Software: Cura
Cura Input Formats: .STL, .OBJ, .DAE, .AMF
Cura Output Format: .GCODE
Connectivity: MicroSD Card, USB port
Electrical
Input Rating: 100-240Vac, 50/60Hz, 1.0A
Physical Dimensions
Printer Frame Dimensions: 325 x 240 x 380 (Width x Depth x Height)
Weight: 7KG

Winplus Cocoon Create Model Maker HE170703 Specifications

General

Brand	Winplus
Model	Cocoon Create Model Maker HE170703
Category	3D Printers
Language	English