Winplus Cocoon Create Model Maker HE170703 - Parts List

8
PARTS LIST
1 x 3D Printer
1 x Filament Spool Stand
1 x Power Cable
1 x USB Cable
1 x 4GB MicroSD Card
1 x Scraper
1 x PTFE Tube
1 x Hex Key Set
2 x Cable Ties
4 x 10m PLA Filament
3 x Magnetic Print Mats
(One already installed)
1 x Metal Base Mat (Attached)
1 x Glue Stick (Not shown)
1 x Instruction Manual
(Not Shown)
1 x Getting Started Guide
(Not Shown)
1 x Warranty Card
(Not Shown)
1 x Levelling Card