Chapter 5: Panel Console Management
EN-104
5.7 Operating Tips
The following messages that you may meet while using LA5572.
a. When the battery power is low, a “Low Battery!” message will display on the
screen to remind.
b. If you remove the wall-mount bracket while arming or other device tamper
proof (i.e. LA5584), the siren will be triggered automatically. Enter the
password directly to turn it off.
c. Once the sensor is disconnected from the gateway, it will indicate by a
strike-through as below. Check the sensor power status or re-join it with the
gateway.
d. When the alarm is triggered, Panel Console will be sync up and display the
alarm message on the screen. Enter the password directly to turn it off.