Chapter 4: Web Management
EN-87
Click on the pull-down menu to see more options.
3. Set the schedule to automatically switch the device on/off in the
On-Demand Timer field.
To calculate the power consumption and cost, do the following:
The current measurement value is displayed in the Power Value field.
i. Enter the peak/off-peak unit price.
ii. Specify the peak hour time duration.
iii. Select the calculation period. The calculation period is from 1 to 3
months. The current measure value is displayed in the Power Value
field.
The total energy consumption and cost are displayed in the Total energy
used and Total amount fields.
4. Click Apply to save the settings.
• By this automation
feature, you may
power control your
in-house lighting, or
device remotely.
1 2 3
SENSORS
POWER
USB/
SD CARD
WAN
PAN
ALARM
SD CARD
APP Wireless Gateway
Wireless Power Meter
Switch
To Next Page
Loading...