WMF Bistro! - Shift Button (Optional); Special Button (Optional); Dispense Milk or Milk Foam; Dispense Hot Water

11
User manual WMF bistro!
Operation
2.4 Shift button (optional)
Each beverages button may be doubly allocated.
Level 1 always active
Press on the Shift button
Level 2 activated
Press desired beverage button.
Level 1 is active again after dispensing a beverage at
L
evel 2.
Special button (optional)
There are special buttons available on the control panel
such as S, M, L or the Decaf button depending on the
version.
These are preselection buttons which establish the desired
amount of the beverage or preparation from the Decaf
grinder before selection of the beverage using the beverage
buttons.
2.5 Dispense milk or milk foam
Press on the beverage button allocated to milk or milk
foam
Dispensing occurs according to the dispensing option
which was set.
2.6 Dispense Hot water
Press on the hot water button
Dispensing occurs according to the dispensing option.
Multiple preselection is possible for the dispensing option
“metered“.




Volume preselection,
see chapter Volume preselection.
Volume preselection,
see chapter Volume preselection.
See dispensing options
button allocation > setting
Free-flow, Start-Stop or metered
X2
Shift button (active/inactive)
see chapter on Setting > operating
options for software