WMF Bistro! - Customer Care; Cleaning Program

25
User manual WMF bistro!
Software
3.3.3 Customer care
Cleaning programs are started from the Care main menu.
The Care main menu contains the following selection
options:
Cleaning program
Milk system
Choc system
Filter change (optional)
Customer care (optional)
Cleaning program
Touch
The daily cleaning program starts.
The program automatically executes milk system rinsing if
milky beverages have been dispensed beforehand. If there
is a choc system installed (mixer system) then choc system
rinsing occurs.
The cleaning program sequence is described in “Quick
reference cleaning“.
Observe the warnings in the chapter “Safety” before
performing cleaning. The Quick reference cleaning and
the chapter “Care” can be read from page 36.
•
•
•
•
•

For display guided processes
see chapter “Software” care.
For general cleaning
see chapter “Care”.
For display guided processes
see chapter “Software” care.
For general cleaning
see chapter “Care”.
For instructions see “Quick
reference for cleaning“.
For instructions see “Quick
reference for cleaning“.
Observe the manual!
Observe the chapter Safety!
Observe the manual!
Observe the chapter Safety!