31
User manual WMF bistro!
Software
Capacity
If there is a scale filter fitted: Set the capacity of the scale
filter here.
(The scale filter capacity can be found in the scale filter
documentation.)
Warm-up rinsing
Enter here the setting stating whether the coffee machine
should rinse out the brewing unit with hot water after
heating up.
Recommended setting: active.
SB operation (self-service)
(active/inactive, default value: inactive)
SB mode active:
No manual insert (only cleaning tablets)
No beverage preselection possible
Menu pad delayed
Maintenance and error messages suppressed
Barista pad and hot rinsing pad not displayed
Foamer rinsing
Automatic foamer rinsing after the last beverage
dispensing with milk components.
Yes/No
Rinsing interval
The time elapsed between the last removal of a beverage
with milk in it and a foamer rinsing. Maximum value with
Plug&Clean is 3 minutes.
Recommended setting: 2 minutes .
•
•
•
•
•
Setting the scale filter and
capacity; only possible if enabled
b
y the WMF Service. team.
Setting the scale filter and
capacity; only possible if enabled
by the WMF Service. team.
SB mode SB mode
Foamer rinsing Foamer rinsing
Rinsing interval Rinsing interval
To Next Page
Loading...
