Cleaning program Plug&Clean
1 2 3 4 5
Touch pad Touch
(Customer Care)
Touch
Cleaning prog.
Touch
switching off
Touch
Start
Cleaning program
sequence starts.
6 6
.1 7 8 8.1
Emty the grounds
container
Open the manual insert
Insert a cleaning tablet
Plug the connection of
the milk hose onto the
Plug&Clean adapter.
Touch
Continue
9 1
0 10.1 11 11.1
The Plug&Clean Cleaning
starts.
Duration approx. 30 secs.
The Choc system rinsing
starts.
Duration approx. 30 secs.
The machine cleaning
starts.
Duration approx. 8 mins.
Step 8-9: Only after dispensing of milk beverages.
Step 10: Only after dispensing of choc beverages (with optional mixer system).
Manual combi spout cleaning
Prior to cleaning switch off at ON/OFF button. Pull out mains plug!
A B
Pull forward the lever behind the
combi spout.
Remove combi spout
Remove milk hose from milk
container and release from combi
spout.
If a mixer hose is fitted remove
it too.
Mix 5 ml cleaner with 0.5 l warm
water in a receptacle.
Dismantle combi spout
Soak parts of combi spout together
with milk hose in the cleaning
solution
All parts must be completely
immersed.
After 5 hours clean all parts
thoroughly with a brush.
C
Rinse combi spout and milk hose
very thoroughly with clear water
so that no cleaner fluid remains
Reassemble combi spout
Replace combi spout
Replace milk hose and mixer hose
Machines with pinch valve: remove milk hose.
Replace in reverse order.
1 2 2.1 3 3.1
Pull forwards with
both hands.
Remove upwards from
the pinch valve.
To Next Page
Loading...
