Wolf BWL-1 S User Manual

Installation and operating instructions
Split air/water heat pump
BWL-1 S(B)-07/10/14
GB
Wolf GmbH • Postfach 1380 • D-84048 Mainburg • Tel. (+49) 8751/74-0 • Fax (+49) 8751/741600 • Internet: www.wolf-heiztechnik.de
Document no.: 3064298_201507 Subjecttotechnicalmodications
Integrated system log book
From:
HCM-3 FW 1.30
AM FW 1.40

Wolf BWL-1 S Specifications

General

Brand	Wolf
Model	BWL-1 S
Category	Heat Pump
Language	English

Summary

Introduction to the Wolf BWL-1S Heat Pump

Safety, Standards, and General Information

Safety instructions, standards, and regulations compliance for the heat pump.

Electrical System and Control Interface

Power Supply and Electrical Safety

General information and safety for power supply and electrical connections.

Connection Diagrams and Module Wiring

Electrical connection diagrams for various models and modules.

Indoor Module Power Supply and PCB

Power supply and PCB connections for the indoor module.

Display Module and Control Operation

Contractor Level Access and Configuration

Contractor Level Access and Password

Steps to enter the contractor level password for authorization.

Contractor Parameters and System Configurations

Overview of contractor parameters and system configuration options.

Performance Specifications and Technical Data

Performance Charts: Output, Consumption, COP

Technical Specifications and Sensor Data

Comprehensive technical specifications, parameters, and sensor resistances.

Operation, Maintenance, and Troubleshooting

System Commissioning Procedures

Maintenance and Cleaning Guidelines

Troubleshooting Faults and Error Codes

Fault codes, possible causes, and remedies for troubleshooting.