173064298_201507
Only transport the heat pump by pallet truck while packaged.
Caution, risk of tipping.
To prevent damage to the appliance, the heat pump's outdoor module
must not be tilted more than 45° during transport.
The components, in particular the plastic casings and the pipework for
the refrigerant circuit and heating side, must not be used to transport
the appliance. Only use the grab handles provided when transporting
the heat pump.
Bear in mind the weight of the heat pump.
Transport to the installation site
To prevent damage during transport, the heat pump must remain packaged and on its
woodenpalletwhilebeingtransportedtothenalinstallationsitebypallettruck.
Observe the "Instructions" on the packaging.
Please note
8. Siting the BWL-1S(B)
To Next Page
Loading...
