4
Instructions for use
The table saw is designed for the slitting and cross-cutting (only with the
cross stop) of all types of timber commensurate with the machine‘s size.
The machine is not to be used for cutting any type of round wood.
The equipment is allowed to be used only for its intended purpose. Any
other use is deemed to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or injuries of any kind re-
sulting from such misuse.
Please note that our equipment has not been designed for use in com-
mercial, trade or industrial applications. Our warranty will be voided if
the equipment is used in commercial, trade or industrial businesses or for
equivalent purposes.
The equipment is to be operated only with suitable saw blades (saw bla-
des made of HM or CV) It is prohibited to use any type of HSS saw blade
and cutting-off wheel. Intended use also includes complying with the sa-
fety information, the assembly instructions and the operating instructions
contained in the operating manual.
All persons who use and service the equipment have to be acquain-
ted with these operating instructions and must be informed about the
equipment‘s potential hazards. It is also imperative to observe the acci-
dent prevention regulations in force in your area. The same applies for the
general rules of health and safety at work.
The manufacturer will not be liable for any changes made to the equip-
ment nor for any damage resulting from such changes.
WZTS_1700_AUS_SPK7.indb 18 21.05.12 15:54
To Next Page
Loading...
Need help?
General
