Wear ear-muffs.
The impact of noise can cause damage to hearing.
The quoted values are emission values and not necessarily reliable work-
place values. Although there is a correlation between emission and im-
mission levels it is impossible to draw any certain conclusions as to the
need for additional precautions. Factors with a potential influence on the
actual immission level at the workplace include the duration of impact,
the type of room, and other sources of noise etc., e.g. the number of ma-
chines and other neighboring operations. Reliable workplace values may
also vary from country to country. With this information the user should
at least be able to make a better assessment of the dangers and risks in-
volved.
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adapt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
Replacing the power cable
If the power cable for this equipment is damaged, it must be replaced by
the manufacturer‘s after-sales service or by similarly trained personnel to
avoid danger.
WZTS_1700_AUS_SPK7.indb 41 21.05.12 15:57
To Next Page
Loading...
