• Insert only batteries of the same type, do not use different types of
batteries or used and new batteries together.
• Make sure that the equipment is switched off after use.
• Remove the batteries if the equipment is not used over a longer pe-
riod.
1.1. Safety information for the table saw
Important! The following basic safety actions must be taken when
using electric tools in order to protect the user from electric shocks
and the risk of injury and fire. Read all the following information be-
fore you use the electric tool and keep these safety instructions in a
safe place.
1. Keep your work area tidy
- Untidy work areas can result in accidents.
2. Make allowance for ambient conditions
- Do not expose electric tools to rain. Never use electric tools in damp
or wet locations. Provide good lighting. Do not use electric tools near
flammable liquids or gases.
3. Guard against electric shock
- Avoid bodily contact with earthed parts (e.g. pipes, radiators, coo-
kers and refrigerators).
4. Keep other persons away!
- Do not allow other persons, particularly children, to touch the tool
or cable, keep them away from your work area.
5. Keep your electric power tools in a safe place
- Unused tools should be stored in a dry, locked room out of
children‘s reach.
6. Do not overload your tools
- Tools work better and safer when used within their quoted capacity
range.
7. Use the right tool.
- Do not use tools or attachments too weak for heavy duty work. Ne-
ver use tools on jobs for which they are not intended; for example, do
not use a hand-held circular saw to cut trees or lop off branches.
8. Wear suitable work clothes
- Never wear loose fitting clothes or jewellery. They may get caught in
moving parts. Rubber gloves and non-slip shoes are recommended
when working outdoors. Wear a hair net if you have long hair.
WZTS_1700_AUS_SPK7.indb 6 21.05.12 15:54
To Next Page
Loading...
Need help?
General
