EVOM™ Manual
World Precision Instruments 11
SYSTEM SETUP-
Main Display
Touch to short electrodes
Preview the plate by its
layout
File name, defined in the
Store Options menu
Current cell in plate Battery indicator
Range (V, mV, Ω, KΩ)
Press to record and index
to the next well. Press and
hold to open the Store
Options menu.
Plate being stored
Fig. 5—The main EVOM™ Manual display.
A negative resistance number will appear in red text. This can be caused by a faulty
electrode in media, (see "System Messages" on page 32) or a blank setting that is
over the measurement (see "Blank Handling Page" on page 14). When the meter is
plugged into a power source, the battery icon shows a charging symbol.
Setup Page
Press
Setup
on the main screen to open the
Setup
page.
Fig. 6—Setup page
• Select Plate – Select the number of wells and the sampling pattern.
• Mode Units – Choose the Units for sampling. (Options include Millivolts, Volts,
Ohms and K Ohms.)
• Blank Handling – Lets you subtract the control blank from the current resistance
measurement.
To Next Page
Loading...
