wtw Cond 3210 - 3 Commissioning; Scope of Delivery; Initial Commissioning; Inserting the Batteries

Cond 3210 Commissioning
13
ba75794e04 04/2012
3 Commissioning
3.1 Scope of delivery
 Conductivity meter Cond 3210
 4 batteries 1.5 V Mignon type AA
 Short instructions
 CD-ROM with detailed operating manual
3.2 Initial commissioning
Perform the following activities:
 Insert the supplied batteries
 Switch on the meter
 Set the date and time
3.2.1 Inserting the batteries
1 Unscrew the two screws (1) on the underside of the meter.
2 Open the battery compartment (2) on the underside of the
meter.
3 Place four batteries (type Mignon AA) in the battery
compartment.
2
1