wtw Cond 3210 - Manual Storage; Displaying and Editing the Measurement Data

Cond 3210 Operation
39
ba75794e04 04/2012
4.5.1 Manual storage
You can transmit a measurement dataset to the data storage as
follows.
If the storage is full The following window appears if all 200 storage locations are occupied:
You have the following options:
 To erase the entire storage, confirm Yes.
 To cancel the storage process and switch to the measured value
display, confirm No.
4.5.2 Displaying and editing the measurement data storage
The contents of the manual measurement data storage can be shown
on the display.
The measurement data storage has a function to erase the entire
1 Press the <STO> key shortly.
The menu for manual storage appears.
2 If necessary, change and confirm the ID number (1 ... 10000)
with <▲><▼> and <ENTER>.
The dataset is stored. The meter switches to the measured
value display.
30.10.2008 11:24:16
pH 7.000 24.8 °C AR +++
ID number: 1
Continue
Manual data storage 4 From 200
22.11.2010
08:00
Back
Data storage full. Erase?
Yes
No
Warning
22.09.2008
08:00
Back