wtw Cond 3210 - Sensor-Independent Settings

Operation Cond 3210
24
ba75794e04 04/2012
4.3 Sensor-independent settings
The Storage & config menu comprises the following settings:
 System (see section 4.3.1).
 Data storage (see section 4.3.2)
4.3.1 System
Overview The following sensor-independent meter characteristics can be
adjusted in the Storage & config/System menu:
 Menu language
 Illumination
 Display contrast
 Interval of the automatic switch-off
 Clock and date function
 Reset of all sensor-independent system settings to the default
condition
Settings To open the Storage & config menu, press the <F1
_>[Menu] key in
the measured value display. After completing the settings, switch to the
measured value display with <M>.
Menu item Setting Description
System / General /
Language
Deutsch
English
(further)
Select the menu language
System / General /
Illumination
Auto
On
Off
Switching the display
illumination on/off
System / General /
Contrast
0 ... 100 % Changing the display
contrast
System / General /
Switchoff time
10 min ... 24 h Adjust the switch-off time
System / Clock Time
Date
Date format
Settings of time and date.
For details, see section
4.2.4
System / Service
information
Hardware version and
software version of the
meter are displayed.