wtw Cond 3210 - Data Storage

Operation Cond 3210
38
ba75794e04 04/2012
4.5 Data storage
You can transmit measured values (datasets) to the data storage:
 Manual storage (see section 4.5.1)
Measurement dataset A complete dataset consists of:
 ID number
 Date/time
 Measured value of the connected sensor
 Measured temperature value of the connected sensor
 AutoRead info: AR appears with the measured value if the
AutoRead criterion was met while storing (stable measured value).
Otherwise, the AR display is missing.
 Calibration evaluation: +++, ++, +, -, or no evaluation
Storage locations The Cond 3210 meter has a measurement data storage.
Storage Maximum number of datasets
Manual data storage 200