wtw Cond 3210 - Keypad Functions

Overview Cond 3210
6
ba75794e04 04/2012
1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <ENTER>) generally indicates a short keystroke
(under 2 sec) in this operating manual. A long keystroke (approx.
2 sec) is indicated by the underscore behind the key symbol (e.g.
<ENTER
_>).
ENTER
M
F1
F2
AR
CAL
STO
RCL
Cond 3210
<F1>:
<F1
_>:
<F2>:
<F2
_>:
Softkey providing situation dependent functions , e.g.:
<F1>/[Menu]: Opens the menu for measurement settings
<F1
_>/[Menu]: Opens the menu for system settings
<On/Off>: Switches the meter on or off
<M>: Selects the measured parameter
<CAL>:
<CAL
_>:
Calls up the calibration procedure
Displays the calibration data
<STO>:
<STO_>
Saves a measured value manually
<RCL>:
<RCL_>
Displays the manually stored measured values
<▲>: Increments values, scrolls
<▼>: Decrements values, scrolls
F1
F2
CAL
STO
RCL