wtw Cond 3210 - Page 18

Operation Cond 3210
18
ba75794e04 04/2012
 Functions
Functions are designated by the name of the function. They are
immediately carried out by confirming with <ENTER>.
Example: Display the Calibration record function.
Messages Information is marked by the
i symbol. It cannot be selected.
Example:
Note
The principles of navigation are explained in the two following sections
by reference of examples:
 Setting the language (section 4.2.3)
 Setting the date and time (see section 4.2.4).
Calibration record
Calibration data storage
Calibration interval
: 150 d
ӕ
22.09.2008
08:00
Back
Measuring cell
Temp. comp. (TC)
TDS factor 1.00
Stability control On
Temperature unit °C
i ӕ = 1413 µS/cm
ӕ
22.09.2008
08:00
Back